not accepting incoming calls

martijn's picture
Posted March 17th, 2010 by martijn (tadpole)

Hi,

I have a very strange problem.
I can dial out through a sip trunk and recieve incoming calls through the same sip trunk.
But if I haven't dial out for about 1-2 minutes I can't recieve any incoming calls anymore until I dial out again.

Does anyone know what the problem could be or where I need to look for this problem?

Thanks for your help.

Martijn


__________________


‹ [SOLVED] Anyone get http CLID lookup working with metrostat? OpenVox Dahdi extension - No inbound ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Sounds like a networking

blanchae's picture
On March 20th, 2010 blanchae (tadpole) said:

Sounds like a networking problem where the arp cache or something is getting cleared through normal usage. An incoming call, sets up the cache which after a preset time like 300 sec then clears itself. I would check your default gateway settings, DNS settings, etc..


__________________

Eugene Blanchard
Author of PBX in a Flash for Newbies and Introduction to Data Communications


Sounds like a registration

mbrevda's picture
On March 20th, 2010 mbrevda (Developer) said:

Sounds like a registration issue with you provider.


__________________

Moshe Brevda, FreePBX/Schmooze Com Development Team