inbound call from our sip server
Hi gurus,
I have the following:
-one internal freepbx with 2 trunks
-one sip trunk to voip ISP and everyting is fine (can make calls)
-one sip trunk to another freepbx (on internet) and everyting is fine (can make calls)
I don't have to do anything to our outside trunks working fine !!!
But now how can i make a trunk from our freepbx that are on internet to our internal freepbx. Our internal freepbx only have a internal ip and is being "natted" to internet.
__________________
News Announcements
New Forum Topics
- asteriskcdrdb vs FreePBX 2.10 cdr reports
- odbc and mysql support
- Configuration for asterisk to ring all extensions
- Unistim Channel Improvments
- @device v @default
- 403 Forbidden when receiving from sip trunk
- Upgraded to FreePBX 2.10, paging stopped working
- DB Error: installing CDR Reports 2.10.0.6
- Problem whith "modules/endpointman"
- MOH server
- CDR data
- FreePBX, and H323 channel
If the PBX on Internet has a
If the PBX on Internet has a static IP use an IAX trunk and register to the machine with a public IP.
The system will get it's IP from the registration. Set host=dynamic on the public box and host=ip of public on the remote box.
iax2 peers
Hi i make this but i can't see the iax peer on the public freepbx !!!!
You need to post complete
You need to post complete information.
Versions, your trunk config, log information etc.
I again, I'm already make a
I again,
I'm already make a sip trunk from our internal freepbx to our external freepbx.
With this setting i can make calls from internal to external (everything is fine)
When i register a phone on external freepbx and call an extension like xxx@internal_ip_address of our internal freepbx i receive the call but i'm not have audio on the phone that are registered on external freepbx, on internal phone i listen everything!!!!
iax2 peers
hi again
i change again to a iax2 trunk and now its working i have to open 4569 udp port on my firewall to my nat ip asterisk box !!!