Day/Night BLF

WizardOfDos's picture
Posted February 12th, 2012 by WizardOfDos (tadpole)

I normally use time conditions and time groups to automate day/night mode, but in this instance it needs to be user controlled. So I created a call flow Toggle and it generated a feature code of *280.

It works just fine but a hint is not being generated. I found this thread (http://www.freepbx.org/forum/freepbx/general-help/day-night-indicator) and did what it said.

When I set usedevstate=true and did amportal restart then core show hints, there was no change. When i reapplies settings in FPBX usedevstate went back to FALSE.

Has something changed that require this to be accomplished differently?


__________________

A Decoy... Shazam!


‹ End-Point-Manager over Internet hi ,can anyone help me please ,i want to add custom port 7060 after my domin ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

You need to use the advanced

tonyclewis's picture
On February 12th, 2012 tonyclewis (Developer) said:

You need to use the advanced settings module to change amportal.conf settings. Not change amportal.conf direct. You will see a setting in their about generating hints. Turn that on.


__________________

Tony Lewis
Schmooze Com, Inc.
FreePBX Developer


Thanks

WizardOfDos's picture
On February 12th, 2012 WizardOfDos (tadpole) said:

I was was and down that page a dozen times... just never hovered on that oprion long enough to read it i guess.

Working.. Thanks


__________________

A Decoy... Shazam!


I've been thru the page

lgaetz's picture
On February 13th, 2012 lgaetz (tadpole) said:

I've been thru the page twice and I'm not seeing it either, what is the option called?


You have to enable Display

alan_mousty's picture
On February 13th, 2012 alan_mousty (tadpole) said:

You have to enable

Display Hidden Settings and Display Readonly Settings and
Override Readonly Settings